Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221
Email: info@cotecprotectivecoatings.co.uk Tel: 0808 123 1214 Mob: 07780808282 Mob: 07421030221

Render Cleaning Ayrshire

Render Cleaning Ayrshire

Render Cleaning 7 Render Cleaning 7
Stone Sills before

Render Cleaning Scotland

Render Cleaning 1) The substrate is a soaked with a solution of Algoclear pro which is to dry. This is then left results should be seen within 4-6 weeks after the application.(Algoclear application picture above results after 3 weeks)
Lighnting Cleanze sodium hypochlorite soft wash biocide is a unique, highly effective, sodium hypochlorite based softwash biocide for exterior hard surface cleaning which does not bioaccumulate – and the powerful surfactant used as part of the formula is fully biodegradable. Lightning Cleanze is the only sodium hypochlorite based softwash biocide that has full government approval from: The Irish PCD (Pesticide Control Division) The UK HSE (Health & Safety Executive) It works extremely rapidly to give remarkable results in only 30-60 minutes – often much less on smooth, non-porous surfaces. This premium product is able to achieve exceptionally rapid results on porous surfaces – such as render – and a near instant cleaning effect on smooth, non-porous surfaces such as metal cladding and UPVC.
Render Cleaning Render Cleaning

Render Cleaning controlling the

biofilm

The way of controlling the biofilm is by impregnating the surface with a solution of AlgoClear® Pro which works on the biofilm by puncturing microorganisms cell walls. It does not interact with the mineral components of self finished renders and does not contain any compound deleterious to the colouring agents or the surface cohesion. In particular, the product has a neutral pH. On porous render, the surfactant will decontaminate deep into the surface by capillary action. Green and red Algae will die within minutes of the application. If the algal film is thick enough, a milky sheen will replace it for a short period, before dispersing. The orange pigment originating from the red algae Trentepholia may dwell in the surface porosity, but being water soluble will wash with the rinse.
Bacteria and Cyanobacteria have thin cell walls and die at rates varying with the concentration of the Algoclear solution. At a normal rate all studied species die within one hour. The self cleansing process takes a few days to a few months in normal exposure. Moulds (black staining)are a group of filamentous fungi. Their structure enables them to key their filaments in the render and as a result, moulds do not self cleanse as readily as algae. The most common species of fungi on façades are the Cladosporium spp and Alternaria spp both metabolise a black pigment protecting them from UV radiations, and causing some staining of the surface. Moulds are killed by a solution of Algoclear within approximately one hour but may take several months to fade.

K-Rend Cleaning

Render Cleaning
Pebble Dash Cleaning Scotland
Render Cleaning 6 Render Cleaning 7 Biofilm appears as a red stain on pebble dash K-Rend Cleaning

How to clean Render

Softwash
Pressure Washing is not recommended to clean Pebble Dash walls as the force of the jet will dislodge the pebble dash in addition it may score a smooth render finish such as K-Rend. Softwashing is the preferred method for the cleaning of Pebble dash and Smooth Renders this non-invasive system uses chemicals to remove the staining rather than force. The Importance of Quality Products. The Softwash Cotec use is a high quality, professional-grade product that is used to clean black, red, green, and yellow – staining from render, paths, upvc, cladding and roofs. The product is manufactured to the highest possible quality and safety standards. The active ingredient – at the level of concentration used in the Softwash– is recommend for cleaning the products of industry-leading companies such as K-Rend, Weber and Kingspan Cladding.
Softwashing the Process Softwashing is an alternative method of cleaning exterior hard surfaces and is the preferred method for the cleaning of rendered walls. Soft washing kills moss, red and green algae, bacteria, lichen, mould that can colonise a wall or roof. The chemicals do not “bio accumulate”, Happing up grass or flower beds is recommended other areas such as tarmacadam flag stones may also need to be covered. The application of Softwash is via a carbon fibre extend pole using low pressure pump unit(pressure equates to that of a garden hose). The first application is applied and given approximately 30-60 minutes dwell time before being rinsed off and the second treatment applied if required. The walls are finally rinsed before the application of a premium biocide to give some residual protection and once dry is perfectly safe for children and pets
Render Cleaning Render Cleaning
Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221
Roof Cleaning Contact Us
Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221

Call Us: 0808123 1214

Render Cleaning Scotland

Render Cleaning

Lighnting Cleanze sodium hypochlorite soft wash biocide is a unique, highly effective, sodium hypochlorite based softwash biocide for exterior hard surface cleaning which does not bioaccumulate – and the powerful surfactant used as part of the formula is fully biodegradable. Lightning Cleanze is the only sodium hypochlorite based softwash biocide that has full government approval from: The Irish PCD (Pesticide Control Division) The UK HSE (Health & Safety Executive) It works extremely rapidly to give remarkable results in only 30-60 minutes – often much less on smooth, non-porous surfaces. This premium product is able to achieve exceptionally rapid results on porous surfaces – such as render – and a near instant cleaning effect on smooth, non-porous surfaces such as metal cladding and UPVC.
Render Cleaning Render Cleaning

Render Cleaning controlling the biofilm

The way of controlling the biofilm is by impregnating the surface with a solution of AlgoClear® Pro which works on the biofilm by puncturing microorganisms cell walls. It does not interact with the mineral components of self finished renders and does not contain any compound deleterious to the colouring agents or the surface cohesion. In particular, the product has a neutral pH. On porous render, the surfactant will decontaminate deep into the surface by capillary action. Green and red Algae will die within minutes of the application. If the algal film is thick enough, a milky sheen will replace it for a short period, before dispersing. The orange pigment originating from the red algae Trentepholia may dwell in the surface porosity, but being water soluble will wash with the rinse.
Bacteria and Cyanobacteria have thin cell walls and die at rates varying with the concentration of the Algoclear solution. At a normal rate all studied species die within one hour. The self cleansing process takes a few days to a few months in normal exposure. Moulds (black staining)are a group of filamentous fungi. Their structure enables them to key their filaments in the render and as a result, moulds do not self cleanse as readily as algae. The most common species of fungi on façades are the Cladosporium spp and Alternaria spp both metabolise a black pigment protecting them from UV radiations, and causing some staining of the surface. Moulds are killed by a solution of Algoclear within approximately one hour but may take several months to fade.
K-Rend Algae Clean
Render Cleaning

Pebble Dash Cleaning Scotland

Render Cleaning 6 Render Cleaning 7 Biofilm appears as a red stain on pebble dash Render Cleaning 7 Render Cleaning 7
Stone Sills before
Stone Sills after
K-Rend Cleaning

How to clean Render

Softwash
Pressure Washing is not recommended to clean Pebble Dash walls as the force of the jet will dislodge the pebble dash in addition it may score a smooth render finish such as K-Rend. Softwashing is the preferred method for the cleaning of Pebble dash and Smooth Renders this non-invasive system uses chemicals to remove the staining rather than force. The Importance of Quality Products. The Softwash Cotec use is a high quality, professional-grade product that is used to clean black, red, green, and yellow – staining from render, paths, upvc, cladding and roofs. The product is manufactured to the highest possible quality and safety standards. The active ingredient – at the level of concentration used in the Softwash– is recommend for cleaning the products of industry-leading companies such as K-Rend, Weber and Kingspan Cladding.
Softwashing the Process Softwashing is an alternative method of cleaning exterior hard surfaces and is the preferred method for the cleaning of rendered walls. Soft washing kills moss, red and green algae, bacteria, lichen, mould that can colonise a wall or roof. The chemicals do not “bio accumulate”, Happing up grass or flower beds is recommended other areas such as tarmacadam flag stones may also need to be covered. The application of Softwash is via a carbon fibre extend pole using low pressure pump unit(pressure equates to that of a garden hose). The first application is applied and given approximately 30-60 minutes dwell time before being rinsed off and the second treatment applied if required. The walls are finally rinse before the application of a premium biocide to give some residual protection and once dry is perfectly safe for children and pets
Render Cleaning Render Cleaning
Render Cleaning 1) The substrate is a soaked with a solution of Algoclear pro which is to dry. This is then left results should be seen within 4-6 weeks after the application.(Algoclear application picture above results after 3 weeks)
Render Cleaning
Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221
Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221

Call Us: 0808123 1214

Render Cleaning Scotland

Render Cleaning 7 Render Cleaning 7
Stone Sills before
Stone Sills after
Render Cleaning 1) The substrate is a soaked with a solution of Algoclear pro which is to dry. This is then left results should be seen within 4-6 weeks after the application.(Algoclear application picture above results after 3 weeks)
Lighnting Cleanze sodium hypochlorite soft wash biocide is a unique, highly effective, sodium hypochlorite based softwash biocide for exterior hard surface cleaning which does not bioaccumulate – and the powerful surfactant used as part of the formula is fully biodegradable. Lightning Cleanze is the only sodium hypochlorite based softwash biocide that has full government approval from: The Irish PCD (Pesticide Control Division) The UK HSE (Health & Safety Executive) It works extremely rapidly to give remarkable results in only 30-60 minutes – often much less on smooth, non-porous surfaces. This premium product is able to achieve exceptionally rapid results on porous surfaces – such as render – and a near instant cleaning effect on smooth, non-porous surfaces such as metal cladding and UPVC.
Render Cleaning Render Cleaning

Render Cleaning controlling the biofilm

The way of controlling the biofilm is by impregnating the surface with a solution of AlgoClear® Pro which works on the biofilm by puncturing microorganisms cell walls. It does not interact with the mineral components of self finished renders and does not contain any compound deleterious to the colouring agents or the surface cohesion. In particular, the product has a neutral pH. On porous render, the surfactant will decontaminate deep into the surface by capillary action. Green and red Algae will die within minutes of the application. If the algal film is thick enough, a milky sheen will replace it for a short period, before dispersing. The orange pigment originating from the red algae Trentepholia may dwell in the surface porosity, but being water soluble will wash with the rinse.
Bacteria and Cyanobacteria have thin cell walls and die at rates varying with the concentration of the Algoclear solution. At a normal rate all studied species die within one hour. The self cleansing process takes a few days to a few months in normal exposure. Moulds (black staining)are a group of filamentous fungi. Their structure enables them to key their filaments in the render and as a result, moulds do not self cleanse as readily as algae. The most common species of fungi on façades are the Cladosporium spp and Alternaria spp both metabolise a black pigment protecting them from UV radiations, and causing some staining of the surface. Moulds are killed by a solution of Algoclear within approximately one hour but may take several months to fade.

K-Rend Cleaning

Render Cleaning
Pebble Dash Cleaning Scotland
Render Cleaning 6 Render Cleaning 7 Biofilm appears as a red stain on pebble dash K-Rend Cleaning

Render Cleaning

How to clean Render

Softwash
Pressure Washing is not recommended to clean Pebble Dash walls as the force of the jet will dislodge the pebble dash in addition it may score a smooth render finish such as K-Rend. Softwashing is the preferred method for the cleaning of Pebble dash and Smooth Renders this non- invasive system uses chemicals to remove the staining rather than force. The Importance of Quality Products. The Softwash Cotec use is a high quality, professional-grade product that is used to clean black, red, green, and yellow – staining from render, paths, upvc, cladding and roofs. The product is manufactured to the highest possible quality and safety standards. The active ingredient – at the level of concentration used in the Softwash– is recommend for cleaning the products of industry- leading companies such as K-Rend, Weber and Kingspan Cladding.
Softwashing the Process Softwashing is an alternative method of cleaning exterior hard surfaces and is the preferred method for the cleaning of rendered walls. Soft washing kills moss, red and green algae, bacteria, lichen, mould that can colonise a wall or roof. The chemicals do not “bio accumulate”, Happing up grass or flower beds is recommended other areas such as tarmacadam flag stones may also need to be covered. The application of Softwash is via a carbon fibre extend pole using low pressure pump unit(pressure equates to that of a garden hose). The first application is applied and given approximately 30-60 minutes dwell time before being rinsed off and the second treatment applied if required. The walls are finally rinsed before the application of a premium biocide to give some residual protection and once dry is perfectly safe for children and pets
Render Cleaning Render Cleaning