Cotec Protective Coatings Ltd
Tel: 0808 123 1214 Tel: 07780808282
Checkatrade Logo

Render Cleaning Kirkintilloch

CONTACT US
Tel: 0808123 1214 Mob: 077 8080 8282 Email: enquiries@cotecprotectivecoatings.co.uk
FREE QUOTE FORM K Rend Cleaning K Rend before Cleaning
K Rend Algae Clean removes red green and black staining on K Rend and similar renders. Rejuvenating the render to a like new condition
K Rend that is initial applied to a wall looks great but over time pollutants start to build up on the surface of the render. This staining can be on all of the property or just the sides which takes the worst of the weather and are normally brightly coloured red green or black. These unsightly marks spoil the aesthetics of the building but over the long term may damage the render.
render cleaning before render cleaning after
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time. Quotes are FREE and without obligation so call or fill out the contact us form

K Rend Algae Clean Kikrintilloch

Green Algae
Biofilm
In the pictures below are various biofilms if your property walls has any of these growths establish it requires to be treated. A Biofilm forms when certain microorganisms adhere to a surface in a moist environment. These biofilms are unsightly but can damage the exterior surface over time but the application of the Softwash product can eradicate almost all of the staining. Green - Red Algae dies within minutes by cell wall puncture Black Fungi dies within a short period of application.
Red Algae Black Fungi
Red Algae
Black Fungi
Green Algae
Cleaning & Treating the biofilm with a Softwash System
System 1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding.
System Application How to clean Render Walls
System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 3-72 hours of application.
The process is completed with a maintenance application of Benz Bio Cleanse or Algoclear Pro which will continue to protect the area for a further 12 months.
K Rend Cleaning after K Rend Cleaning before
Before
After
Day 1 before render treatment Day 1 after render treatment
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Not affected by hard or mineralised water Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores
A (ddac) based Softwash solution that will kill the algae, lichen fungus and mould spores and will provide a degree of ongoing residual protection. This is a slower process that shows results between 6 to 12 weeks, and the surfaces will continue to naturally self-cleanse over the next 12 months.
Day 30 after render treatment
Day 1 before treatment
Day 1 after treatment
Day 60 after treatment
System 2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
System 2: The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry. This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
Algoclear Logo
K Rend Cleaning K Rend Cleaning cast stone cleaning before cast stone cleaning after

Cast Stone Cleaning

High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning
Cotec Protective Coatings Ltd
Checkatrade Logo
Contact Us FREE QUOTE FORM
Tel: 0808123 1214 Mob: 077 8080 8282 Email: enquiries@cotecprotectivecoatings.co.uk

Render Cleaning Kirkintilloch

K Rend Cleaning
K Rend that is initial applied to a wall looks great but over time pollutants start to build up on the surface of the render. This staining can be on all of the property or just the sides which takes the worst of the weather and are normally brightly coloured red green or black. These unsightly marks spoil the aesthetics of the building but over the long term may damage the render.

K Rend Cleaning Kirkintilloch

Green Algae
Biofilm
Red Algae Black Fungi
Red Algae
Black Fungi
Green Algae
In the pictures below are various biofilms if your property walls has any of these growths establish it requires to be treated. A Biofilm forms when certain microorganisms adhere to a surface in a moist environment. These biofilms are unsightly but can damage the exterior surface over time but the application of the Softwash product can eradicate almost all of the staining. Green - Red Algae dies within minutes by cell wall puncture Black Fungi dies within a short period of application.
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time. Quotes are FREE and without obligation so call or fill out the contact us form
Cleaning & Treating the biofilm with a Softwash System
System 1) A hypochlorite based softwash biocide which at 5:1- 10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
System Application How to clean Render Walls
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on.
System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 3-72 hours of application.
K Rend Cleaning K Rend before Cleaning
The process is completed with a maintenance application of Benz Bio Cleanse of Algoclear Pro which will continue to protect the area for a further 12 months.
Softwash Solution application
Softwash Spray Application
K Rend Cleaning after K Rend Cleaning before
Before
After
Day 1 before render treatment Day 1 after render treatment
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Not affected by hard or mineralised water Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores
A (ddac) based Softwash solution that will kill the algae, lichen fungus and mould spores and will provide a degree of ongoing residual protection. This is a slower process that shows results between 6 to 12 weeks, and the surfaces will continue to naturally self-cleanse over the next 12 months.
Day 30 after render treatment
Day 1 before treatment
Day 1 after treatment
Day 60 after treatment
System 2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
System 2: The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry. This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
Algoclear Logo cast stone cleaning cast stone cleaning

Cast Stone Cleaning

High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning