K REND CLEANING
The cost of K Rend Cleaning varies depending on the area to be cleaned and the contamination of the wall.
Prices from £100
Tel: 0808 123 1214
Mob: 07780808282
Mob:07761167885
Email: enquiries@cotecprotectivecoatings.co.uk
Cleaning & Treating the biofilm with a Softwash System
System 1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution
contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
The Softwash Solution:
K Rend that is initial applied to a wall looks great but over time pollutants start to build up on the surface of the render. This staining can be on all of the property or just the sides which
takes the worst of the weather and are normally brightly coloured red green or black. These unsightly marks spoil the aesthetics of the building but over the long term may damage the
render.
Cleans – Sanitises – Disinfects
The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding.
Effective and safe to use on:
o
Coloured and plain wall render
o
Concrete patios & paths
o
Painted surfaces
o
Timber decking
o
Natural stone, including sandstone and granite
Render Cleaning Glasgow
Fully biodegradable
Does not bio-accumulate
Ph neutral, so safe for materials and gentle on people
Controls algae, lichen, fungi, moss and mould
Safe for children and pets once treated surface is completely dry
Non-bleaching (contain no bleach or acids)
Not affected by hard or mineralised water
Harmless to all known building materials
Can be used as a pre-painting primer to kill algae and mould spores
A (ddac) based Softwash solution that will kill the algae, lichen fungus and mould spores and will provide a degree of ongoing residual protection. This is a slower process that shows
results between 4 to 6 weeks, and the surfaces will continue to naturally self-cleanse over the next 12 months.
Day 1 before treatment
Day 1 after treatment
Day 30 after treatment(and will continue
to improve over the following months)
System 2
Softwash soloution is sprayed over the render to saturation and then left no rinsing is required to the wall.
Softwash Solution application is at an extremely low pressure (no more than
your garden hose)
Tel: 0808 123 1214
The render can be treated using our professional softwash
products which are fully approved by both the Irish
Pesticides Registration & Control Service (PCS) and UK
Health & Safety Executive (HSE) for use as a softwashing
biocide in Ireland and the UK also it's fully compliant with
the EU "REACH" (Registration, Evaluation, Authorisation &
restriction of Chemicals) regulations for cleaning exterior
hard surfaces.
This professional grade product can give outstanding
results as can be seen in the photos. A safe and effect
method to return your property to that new look again. We
are an experienced Softwash applicator with all the
professional up to date equipment to give a quality finish
every time.
Quotes are FREE and without obligation so call or fill out
the contact us form
System 2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on.
System Application How to clean Render Walls
System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60
minutes before being rinsed of. It may require more than 1 treatment to bring the walls
up to an acceptable standard. The final step of the process is to treat the wall with the
inhibitor solution. Results are normally seen within 3-24 hours of application.
System 2: The application of a (DDAC) solution. The wall is saturated with the solution
which is not rinsed off but just left to dry. This system can take up to 1 year to fully
clean but some noticeable difference should be seen within a few months.
K Rend Cleaning (results can be achieved the same day for some works)
Stone Cleaning
Render Cleaning Glasgow
COMMERCIAL - DOMESTIC
EXTERIOR CLEANING CONTRACTOR
High Pressure washing can damage natural stone and is best
avoided Softwashing is the preferred method for cleaning Natural
Stone but super-heated water at very low pressure can also be
used.
The Softwash system we use can not only clean the stone but can
have residual benefits.
Render Cleaning Glasgow
Tel: 0808 123 1214
Mob: 07780808282
Render Cleaning Glasgow
K Rend that is initial applied to a wall looks great but
over time pollutants start to build up on the surface of
the render. This staining can be on all of the property
or just the sides which takes the worst of the weather
and are normally brightly coloured red green or black.
These unsightly marks spoil the aesthetics of the
building but over the long term may damage the
render.
The render can be treated using our professional
softwash products which are fully approved by both
the Irish Pesticides Registration & Control Service
(PCS) and UK Health & Safety Executive (HSE) for
use as a softwashing biocide in Ireland and the UK
also it's fully compliant with the EU "REACH"
(Registration, Evaluation, Authorisation & restriction of
Chemicals) regulations for cleaning exterior hard
surfaces.
This professional grade product can give outstanding
results as can be seen in the photos. A safe and
effect method to return your property to that new look
again. We are an experienced Softwash applicator
with all the professional up to date equipment to give
a quality finish every time.
Quotes are FREE and without obligation so call or fill
out the contact us form
Cleaning & Treating the biofilm with a
Softwash System
System 1) A hypochlorite based softwash biocide which
at 5:1-10:1 dilution is classed by the EU, PCD and HSE
as non corrosive or hazardous to people or the
environment. This solution contains no acids or
solvents does not bio-accumulate and the surfactant is
fully biodegradable and after use it quickly breaks down
into tiny amounts of ordinary salt and water
The Softwash Solution:
Cleans – Sanitises – Disinfects
The products active ingredient is recommended for the
cleaning of – render and cladding – of industry-leading
companies such as K Rend, Weber and Kingspan
Cladding.
Effective and safe to use on:
o
Coloured and plain wall render
o
Concrete patios & paths
o
Painted surfaces
o
Timber decking
o
Natural stone, including sandstone and granite
Fully biodegradable
Does not bio-accumulate
Ph neutral, so safe for materials and gentle on people
Controls algae, lichen, fungi, moss and mould
Safe for children and pets once treated surface is
completely dry
Non-bleaching (contain no bleach or acids)
Harmless to all known building materials
Can be used as a pre-painting primer to kill algae and
mould spores
A (ddac) based Softwash solution that will kill the algae,
lichen fungus and mould spores and will provide a
degree of ongoing residual protection. This is a slower
process that shows results between 4 to 6 weeks, and
the surfaces will continue to naturally self-cleanse over
the next 12 months.
Day 1 before treatment
Day 1 after treatment
Day 30 after treatment
System 2 Clean
Softwash soloution is sprayed over the render to
saturation and then left no rinsing is required to the
wall.
Softwash Solution application is at an extremely
low pressure (no more than your garden hose)
System 2) A Biocidal Wash (DDAC) fully biodegradable
does not bio-accumulate Ph neutral, so safe for children
and pets once treated surface is completely dry.
The Softwash Solution:
The application of a Softwash Solution via a very low
pressure nozzle and pump. The Softwash solution is
sprayed onto the wall or in some instances it is brushed
on.
System Application How to clean
Render Walls
System 1: The hypochlorite solution is sprayed onto the
wall and then left for 30-60 minutes before being rinsed
off. It may require more than 1 treatment to bring the
walls up to an acceptable standard. The final step of the
process is to treat the wall with the inhibitor solution.
Results are normally seen within 3-72 hours of
application.
System 2: The application of a (DDAC) solution. The
wall is saturated with the solution which is not rinsed off
but just left to dry. This system can take up to 1 year to
fully clean but some noticeable difference should be
seen within a few months.
System 1 Clean after
Tel: 0808 123 1214
Click to Call: 07780808282
Exterior Cleaning Contractor
Commercial Domestic
High Pressure washing can damage natural stone and
is best avoided Softwashing is the preferred method for
cleaning Natural Stone but super-heated water at very
low pressure can also be used.
The Softwash system we use can not only clean the
stone but can have residual benefits.
System 1 Clean before
System 2 Clean before
System 2 Clean after
Stone Cleaning
Softwash Application
