K REND CLEANING

The cost of K Rend Cleaning varies depending on the area to be cleaned and the contamination of the wall.
Prices from £100
Tel: 0808 123 1214 Mob: 07780808282 Mob:07761167885
Email: enquiries@cotecprotectivecoatings.co.uk
Cleaning & Treating the biofilm with a Softwash System
System 1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
The Softwash Solution:
K Rend that is initial applied to a wall looks great but over time pollutants start to build up on the surface of the render. This staining can be on all of the property or just the sides which takes the worst of the weather and are normally brightly coloured red green or black. These unsightly marks spoil the aesthetics of the building but over the long term may damage the render.
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite

Render Cleaning Ayrshire

Softwash Solution application render cleaning before Day 1 before render treatment Day 1 after render treatment K Rend Cleaning before
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Not affected by hard or mineralised water Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores
A (ddac) based Softwash solution that will kill the algae, lichen fungus and mould spores and will provide a degree of ongoing residual protection. This is a slower process that shows results between 4 to 6 weeks, and the surfaces will continue to naturally self-cleanse over the next 12 months.
Day 30 after render treatment
Day 1 before treatment
Day 1 after treatment
Day 30 after treatment(and will continue to improve over the following months)
System 2 Softwash soloution is sprayed over the render to saturation and then left no rinsing is required to the wall.
Softwash Solution application is at an extremely low pressure (no more than your garden hose)
Email: cotecprotectivecoatingsltd@gmail.com Mob: 07780808282 Mob: 07761167885
Tel: 0808 123 1214
render cleaning after
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time. Quotes are FREE and without obligation so call or fill out the contact us form
System 2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on.
System Application How to clean Render Walls
System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 3-24 hours of application. System 2: The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry. This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
benz
Cotec Protective Coatings Ltd
K Rend Cleaning (results can be achieved the same day for some works)
render cleaning render cleaning
Stone Cleaning

Render Cleaning Ayrshire

Cotec Van
COMMERCIAL - DOMESTIC EXTERIOR CLEANING CONTRACTOR
Cotec Protective Coatings Ltd
render cleaning render cleaning
High Pressure washing can damage natural stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning FREE QUOTE FREE QUOTE

Render Cleaning Ayrshire

Email: cotecprotectivecoatingsltd@gmail.com Mob: 07780808282 Mob: 07761167885
Tel: 0808 123 1214 Mob: 07780808282

Render Cleaning Ayrshire

K Rend that is initial applied to a wall looks great but over time pollutants start to build up on the surface of the render. This staining can be on all of the property or just the sides which takes the worst of the weather and are normally brightly coloured red green or black. These unsightly marks spoil the aesthetics of the building but over the long term may damage the render.
render cleaning before render cleaning after
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time. Quotes are FREE and without obligation so call or fill out the contact us form
Cleaning & Treating the biofilm with a Softwash System
System 1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite
Softwash Solution application Day 1 before render treatment Day 1 after render treatment
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores
A (ddac) based Softwash solution that will kill the algae, lichen fungus and mould spores and will provide a degree of ongoing residual protection. This is a slower process that shows results between 4 to 6 weeks, and the surfaces will continue to naturally self-cleanse over the next 12 months.
Day 30 after render treatment
Day 1 before treatment
Day 1 after treatment
Day 30 after treatment
System 2 Clean Softwash soloution is sprayed over the render to saturation and then left no rinsing is required to the wall.
Softwash Solution application is at an extremely low pressure (no more than your garden hose)
System 2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on.
System Application How to clean Render Walls
System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed off. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 3-72 hours of application. System 2: The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry. This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
System 1 Clean after
Tel: 0808 123 1214
Click to Call: 07780808282
Cotec Protective Coatings Ltd
cotec van
Exterior Cleaning Contractor
Commercial Domestic
Cotec Protective Coatings Ltd
High Pressure washing can damage natural stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning render cleaning render cleaning
System 1 Clean before
System 2 Clean before
System 2 Clean after
Stone Cleaning
Softwash Application