Pebbledash Cleaning Pebbledash Cleaning
Cotec Protective Coatings

Tel: 0808 123 1214 Tel: 07780808282

Tel: 0808 123 1214 Tel: 07780808282
Cotec Pebbledash Cleaning

Pebledash Cleaning Hamilton

Pressure Washing at a high pressure is not recommended to clean Pebbledash walls as the force of the jet will dislodge the dash. Softwashing is the preferred method for the cleaning of Pebble Dash and Roughcast this non-invasive system uses chemicals to remove the staining rather than force.
Cleaning & Treating the biofilm with a Softwash System
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite
1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
Pebble Dash Clean before Pebble Dash Clean after
Pebbledash is common decorative finish on many exterior house walls. The dash over time captures small dirt particles this allows bacterial growth to establish which appears as red, green or black staining. This staining is more obvious on the walls that take the brunt of the weather but can be on all walls. The biofilm staining can be removed from the wall using our Softwash systems.
Before
After
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time.

Pebbledash Cleaning Hamilton

Pebble Dash Cleaning (results can be achieved the same day for some works)
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores Soaks deep into porous surfaces – killing the micro-organisms responsible for unsightly discolouring, and potential structural damage
2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
Before
After
Results can take up to 1 year to cleanse the wall
benz benz System Application How to clean Pebbledash Walls The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on. System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 72 hours of application. System 2:   The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry.  This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
The surrounds of doors and windows can be made from cast stone which is made from Natural Aggregates, Cementitious Binder and Pigments but over time grime builds up on the surface and need to be cleaned. High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning Stone Cleaning Stone Cleaning Stone Cleaning

Cast Stone Cleaning

Stone Cleaning
Cast Stone Cleaning

Cast Stone Cleaning

The build-up of moss, lichen and built-up dirt must be removed normally with a soft bristle brush. The Softwash is then applied to the surface area left to dwell before being rinsed the procedure may need to be carried out more than once. This can be follow with an inhibitor treatment.
benz
Before
After
Checkatrade Logo

Pebledash Cleaning Hamilton

Pressure Washing at a high pressure is not recommended to clean Pebbledash walls as the force of the jet will dislodge the dash. Softwashing is the preferred method for the cleaning of Pebble Dash and Roughcast this non-invasive system uses chemicals to remove the staining rather than force.
Cleaning & Treating the biofilm with a Softwash System
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite
1) A hypochlorite based softwash biocide which at 5:1- 10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
Pebble Dash Clean before Pebble Dash Clean after
Pebbledash is common decorative finish on many exterior house walls. The dash over time captures small dirt particles this allows bacterial growth to establish which appears as red, green or black staining. This staining is more obvious on the walls that take the brunt of the weather but can be on all walls. The biofilm staining can be removed from the wall using our Softwash systems.
Before
After
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time.

Pebbledash Cleaning Hamilton

Pebble Dash Cleaning (results can be achieved the same day for some works)
Pebbledash Cleaning Pebbledash Cleaning
2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
Before
After
Results can take up to 1 year to cleanse the wall
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores Soaks deep into porous surfaces – killing the micro- organisms responsible for unsightly discolouring, and potential structural damage

Cast Stone Cleaning

Stone cleaning Stone cleaning
The surrounds of doors and windows can be made from cast stone which is made from Natural Aggregates, Cementitious Binder and Pigments but over time grime builds up on the surface and need to be cleaned. High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone Cleaning Stone Cleaning benz

Cast Stone Cleaning

The build-up of moss, lichen and built-up dirt must be removed normally with a soft bristle brush. The Softwash is then applied to the surface area left to dwell before being rinsed the procedure may need to be carried out more than once. This is followed with an inhibitor treatment.
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicators with all the professional up to date equipment to give a quality finish every time.
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on. System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 3-24 hours of application. System 2: The application of a (DDAC) solution. The wall is saturated with the solution which is not rinsed off but just left to dry. This system can take up to 1 year to fully clean but some noticeable difference should be seen within a few months.
System Application How to clean Render Walls
Softwash Application
Cotec Protective Coatings Ltd
Cotec Logo
Tel: 0808 123 1214 Mob: 07780808282
Checkatrade logo