Pebble dash Cleaning before Pebbledash Cleaning
Cotec Protective Coatings Ltd
Tel: 0808 123 1214 Tel: 07780808282
Checkatrade Logo

Pebbledash Cleaning Barrhead

CONTACT US
Tel: 0808123 1214 Mob: 077 8080 8282 Email: enquiries@cotecprotectivecoatings.co.uk
FREE QUOTE FORM
Pressure Washing at a high pressure is not recommended to clean Pebbledash walls as the force of the jet will dislodge the dash. Softwashing is the preferred method for the cleaning of Pebble Dash and Roughcast this non-invasive system uses chemicals to remove the staining rather than force.
Cleaning & Treating the biofilm with a Softwash System
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite
1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
Pebbledash is common decorative finish on many exterior house walls. The dash over time captures small dirt particles this allows bacterial growth to establish which appears as red, green or black staining. This staining is more obvious on the walls that take the brunt of the weather but can be on all walls. The biofilm staining can be removed from the wall using our Softwash systems.
Before
After
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time.
Pebble Dash Cleaning (results can be achieved the same day for some works)

Pebbledash Cleaning Barrhead

The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on. System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 72 hours of application but can take a few weeks.
System Application How to clean Render Walls
Softwash Application Softwash Application
Remaining staining will disappear within 72hours
Before
Pebbledash cleaning
Before
After
Pebble Dash Cleaning (results can be achieved the same day for some works)
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores Soaks deep into porous surfaces – killing the micro- organisms responsible for unsightly discolouring, and potential structural damage
2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
Pebble Dash Cleaning before Pebble Dash Cleaning after
Before
90 Days After
After
Before
After
Pebble Dash Cleaning Pebble Dash Cleaning
Same Day Results on these Pebbledash Properties Softwash Biocide Cleans – Sanitises – Disinfects This powerful softwash biocide rapidly removes black, red, green and yellow staining – caused by algae, lichen, fungi, moss and mould – from render The Softwash Biocide is fully government approved sodium hypochlorite based softwash biocide available in the UK & Ireland. Contains no acids or solvents Safe for humans and materials. Safe for our environment
Pebbledash Cleaning Pebbledash Cleaning
Pebbledash Cleaning A few treatments of Softwash can rejuvenate the property walls. The dramatic results can achieved in 1 day but normally after 72 hours
Pebbledash Cleaning before Pebbledash Cleaning after
Before
After
Green Algae

Biofilm

In the pictures below are various biofilms if your property walls has any of these growths establish it requires to be treated. A Biofilm forms when certain microorganisms adhere to a surface in a moist environment. These biofilms are unsightly but can damage the exterior surface over time but the application of the Softwash product can eradicate almost all of the staining. Green - Red Algae dies within minutes by cell wall puncture Black Fungi dies within a short period of application.
Red Algae Black Fungi

Red Algae

Black Fungi

Green Algae

Softwash Cleaning
cast stone cleaning before cast stone cleaning after

Cast Stone Cleaning

High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning
Cotec Protective Coatings Ltd
Checkatrade Logo
Contact Us FREE QUOTE FORM
Tel: 0808123 1214 Mob: 077 8080 8282 Email: enquiries@cotecprotectivecoatings.co.uk

Pebbledash Cleaning Barrhead

Pebbledash Cleaning before Pebbledash Cleaning after
After
Pebble Dash Clean before Pebble Dash Clean after Pebbledash Cleaning
Pebbledash is common decorative finish on many exterior house walls. The dash over time captures small dirt particles this allows bacterial growth to establish which appears as red, green or black staining. This staining is more obvious on the walls that take the brunt of the weather but can be on all walls. The biofilm staining can be removed from the wall using our Softwash systems.

Pebbledash Cleaning Barrhead

Green Algae

Biofilm

In the pictures below are various biofilms if your property walls has any of these growths establish it requires to be treated. A Biofilm forms when certain microorganisms adhere to a surface in a moist environment. These biofilms are unsightly but can damage the exterior surface over time but the application of the Softwash product can eradicate almost all of the staining. Green - Red Algae dies within minutes by cell wall puncture Black Fungi dies within a short period of application.
Red Algae Black Fungi

Red Algae

Black Fungi

Green Algae

Pebble dash Cleaning before Pebbledash Cleaning
Pressure Washing at a high pressure is not recommended to clean Pebbledash walls as the force of the jet will dislodge the dash. Softwashing is the preferred method for the cleaning of Pebble Dash and Roughcast this non-invasive system uses chemicals to remove the staining rather than force.
Cleaning & Treating the biofilm with a Softwash System
The Softwash Solution:
Cleans – Sanitises – Disinfects The products active ingredient is recommended for the cleaning of – render and cladding – of industry-leading companies such as K Rend, Weber and Kingspan Cladding. Effective and safe to use on: o Coloured and plain wall render o Concrete patios & paths o Painted surfaces o Timber decking o Natural stone, including sandstone and granite
1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment. This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of ordinary salt and water
Before
After
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation, Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces. This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again. We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time.
Pebble Dash Cleaning (results can be achieved the same day for some works)
System Application How to clean Render Walls
The application of a Softwash Solution via a very low pressure nozzle and pump. The Softwash solution is sprayed onto the wall or in some instances it is brushed on. System 1: The hypochlorite solution is sprayed onto the wall and then left for 30-60 minutes before being rinsed of. It may require more than 1 treatment to bring the walls up to an acceptable standard. The final step of the process is to treat the wall with the inhibitor solution. Results are normally seen within 72 hours of application but can take a few weeks.
Softwash Application Softwash Application
Remaining staining will disappear within 72hours
Fully biodegradable Does not bio-accumulate Ph neutral, so safe for materials and gentle on people Controls algae, lichen, fungi, moss and mould Safe for children and pets once treated surface is completely dry Non-bleaching (contain no bleach or acids) Harmless to all known building materials Can be used as a pre-painting primer to kill algae and mould spores Soaks deep into porous surfaces – killing the micro- organisms responsible for unsightly discolouring, and potential structural damage
2) A Biocidal Wash (DDAC) fully biodegradable does not bio- accumulate Ph neutral, so safe for children and pets once treated surface is completely dry.
The Softwash Solution:
Pebble Dash Cleaning before Pebble Dash Cleaning after
Before
90 Days After
Pebbledash Cleaning A few treatments of Softwash can rejuvenate the property walls. The dramatic results can achieved in 1 day but normally after 72 hours
Pebble Dash Cleaning Pebble Dash Cleaning Pebbledash Cleaning before Pebbledash Cleaning after
Softwash Cleaning
cast stone cleaning cast stone cleaning

Cast Stone Cleaning

High Pressure washing can damage natural stone or cast stone and is best avoided Softwashing is the preferred method for cleaning Natural Stone but super-heated water at very low pressure can also be used. The Softwash system we use can not only clean the stone but can have residual benefits.
Stone cleaning Stone cleaning